HT8 Drum Floor Sander

The HT8 is a 200mm (8″) high performance drum floor sander with clamp bar sanding drum technology. Available with multi-speed or single speed control.

  • No volt safety switch prevents accidental start-up.
  • Choice of single speed or multi-speed switch.
  • Powerful 4 pole (brush) motor geared 3:1, up to 4.5hp at the drum.
  • Dynamical balanced sanding drum.
  • Tough clamp bar style drum.
  • High impact resistant ABS guards.
  • High powered vacuum system.
  • Disposable paper or cloth dust bags.
Category:
Model HT8-1
Product Codes 07005 (220/240V Single Speed)
07006 (110/120V Single Speed)

07005MS (220/240V Multi Speed)
07006MS (110/120V Multi Speed)

V = Volts
Power Supply 220/240V 50/60Hz
110/120V 50/60Hz
V = Volts
Hz =  Hertz (unit of frequency)
Off Load Current 220/240V = 5A
110/120V = 8A
A =Amps
Average Load Current 220/240V = 8A
110/120V = 15A
A =Amps
Noise 95 dBA at 1 meter (3'2") dBA = decibels
Vibration 1.60 m/s2 rms m/s = meters per second, rms = root mean squared
Switch Single Speed - contactor type On/Off with no volt start and overload protection.

Multi Speed - electronic control with 4 operating speeds, no volt start and overload protection, service indicator and power-connected light, fault indicator light.

Motor Continuous heavy-duty AC/DC self cooling 4 brush motor. AC/DC = Alternating Current/Direct Current
Motor RPM Single Speed = 8,500

Multi Speed = 8,500/7,300/6,900/6,500 user selected speeds 4/3/2/1

RPM = revolutions per minute

Mean rpm across voltage range, actual rmp will vary depending on voltage and condition of machine.

Drum RPM Single Speed = 3,300

Multi Speed = 3,300/2,800/2,650/2,500 user selected speeds 4/3/2/1

RPM = revolutions per minute

Mean rpm across voltage range, actual rmp will vary depending on voltage and condition of machine.

Sanding Drum 203mm (8") wide aluminium extrusion with screw on moulded rubber drum cover with stainless steel backing and 2 screw abrasive clamp bar, dynamically balanced to 0 to 3g (0 to 0.106 oz) tolerance. g = gram, oz = ounce
Drive Non-slip toothed timing belts and high precision gear cut pulleys.
Dust Pickup Seated oversize alloy vacuum fan with adustable dust shoe, disposable paper dust bag or cloth bag.
Moving Parts Sealed for life ball bearings.
Guards High impact injection moulded ABS
Abrasives 495mm (19.5") total length x 203mm (8") wide abrasive sheet with notched and angled ends. Recommended grit P24 to P120. Recommended type aluminium oxide or silicon carbide, backing E or F weight paper, bonding resin over resin with antistatic additives.
Power Cable 7m (23') Non-marking outer insulation.
Dimensions 322mm x 940mm x 855mm
(12.7" x 37" x 33.6")
width x depth x height

Maximum dimensions with handle fully extended and dust bag in operating position.

Weight Net 41.5kg (91.5lbs)
Shipping Weight 50.0kg (110.3lbs)
Shipping Dimensions 780mm x 400mm x 440mm
(30.75" x 15.75" x 17.5")
width x depth x height
Quantity per Pallet 6 Pallet size 1000mm x 800mm
Warranty 2 years
Approvals CE (220/240V)
CE (110/120V)
CSA/C US (110V North America)
CE = European Economic Area Manufacturer Certification

CSA/C US = Canadian Standards Association certified for USA and Canada